Filter
Top Products
155
XS712T Smart Switch
Global Trust Mode can be one of the following:
• Untrusted. Do not trust any CoS packet marking at ingress.
• 8
02.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of seven internal
hardware priority queues.
• DSCP.
The six most significant bits of the DiffServ field are called the Differentiated
Services Code Point (DSCP) bits.
4. From the I
nterface Trust Mode drop down list, select the trust mode for ingress traffic on the
interface.
Interface Trust Mode can be one of the following:
• Untruste
d. Do not trust any CoS packet marking at ingress.
• 8
02.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of seven internal
hardware priority queues.
• DSCP.
The six most significant bits of the DiffServ field are called the Differentiated
Services Code Point (DSCP) bits.
5. Click App
ly.
CoS Interface Configuration
Use the CoS Interface Configuration screen to apply an interface shaping rate to all
interfaces or to a specific interface.
To configure CoS settings for an interface:
1. Select Qo
S CoS > Advanced CoS Interface Configuration.