Filter
Top Products
245
XS712T Smart Switch
EAP Statistics
Use the EAP Statistics screen to display information about EAP packets received on a
specific port.
To display the EAP statistics screen:
1. Select Monitoring
Ports > EAP Statistics.
2. Select whether to display physical interfaces, link aggregation groups (LAGs), or both by
clicking one of the following links above the table heading:
• 1. On
ly physical interfaces are displayed. This is the default setting.
• All.
Both physical interfaces and link aggregation groups are displayed.
To locate an interface quickly, type the interface number (for example, xg12) in the Go To
I
nterface field at the top or bottom of the table and click Go.
The following table describes the EAP statistics displayed on the screen.
Table 40. EAP statistics
Field Description
Ports The interface which is polled for statistics.
Frames Received The number of valid
EAPOL frames received on the port.
Frames Transmitted The number of EAPOL frames transmitted through the port.
Start Frames Received The number of EAPOL Start frames received on the port.
Logoff Frames Received The number of EAPOL Log off frames that ha
ve been received on the
port.
Last Frame Version The protocol version number attached to the most recently received
EAPOL frame.
Last Frame Source The source MAC Address attached to
the most recently received
EAPOL frame.