Filter
Top Products
117
XS712T Smart Switch
3. Select the interfaces for which you want to configure the CoS settings:
• T
o configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS.
• T
o configure IGMP Snooping settings for both physical ports and LAGs, click ALL.
4. Select th
e check box next to the port or LAG to configure.
You can select multiple ports and LAGs to apply the same setting to the selected
interfa
ces. Select the check box in the heading row to apply the same settings to all
interfaces.
5. Conf
igure the IGMP Snooping values for the selected port(s) or LAG(s):
• Adm
in Mode. Select the interface mode for the selected interface for IGMP Snooping
for the switch from the menu. The default is Disable.
• Hos
t Timeout. Specify the amount of time you want the switch to wait for a report for
a particular group on a particular interface before it deletes that interface from the
group. Enter a value between 2 and 3600 seconds. The default is 260 seconds.
• Max Res
ponse Time. Specify the amount of time you want the switch to wait after
sending a query on an interface because it did not receive a report for a particular
group on that interface. Enter a value greater or equal to 1 and less than the Host
Timeout, in seconds. The default is 10 seconds.
• MRouter T
imeout. Specify the amount of time you want the switch to wait to receive
a query on an interface before removing it from the list of interfaces with multicast
routers attached. Enter a value between 0 and 3600 seconds. The default is 0
seconds. A value of zero indicates an infinite timeout; no expiration.
• F
ast Leave Admin Mode. Select the Fast Leave mode for a particular interface from
the menu. The default is Disable.
6. Click App
ly.
IGMP Snooping Table
Use the IGMP Snooping Table screen to view all of the entries in the Multicast Forwarding
Database that were created for IGMP snooping.
To view the entries in the IGMP snooping table:
1. Select Switch
ing Multicast IGMP Snooping IGMP Snooping Table.
2. Next to Search By MAC Address, specify the MAC Address whose MFDB table entry you
want to view.
Enter six two-digit hexadecimal numbers sep
arated by colons, for example
00:01:23:43:45:67.