Filter
Top Products
223
XS712T Smart Switch
Note: There is an implicit “deny all” rule at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit “deny all” rule applies and the
packet is dropped.
To add rules to an IP ACL:
1. Select Security
ACL > Advanced IP Extended Rules.
In the following figure, an extended IP ACL
exists, and one rule has been configured.
2. In the ACL ID/Name list, select the ACL to add the rule to.
3. Click Add.
The screen displays the extended ACL Ru
le Configuration fields.
4. Next to Rule ID, specify a number from 1–10 to identify the IP ACL rule.
You can create up to 10 rules for each ACL.