Filter
Top Products
157
XS712T Smart Switch
To configure CoS queue settings for an interface:
1. Select QoS CoS > Advanced Interface Queue Configuration.
2. To configure CoS queue settings for a physical port, enter the interface and click Go to
select that particular interface.
3. Select th
e interfaces for which you want to configure the interface queue settings:
• T
o configure CoS settings for a Link Aggregation Group (LAG), click LAGS.
• T
o configure CoS settings for both physical ports and LAGs, click ALL.
4. Select th
e check box next to the port or LAG to configure.
You can select multiple ports and LAGs to apply the same setting to the selected
interfa
ces. Select the check box in the heading row to apply a trust mode or rate to all
interfaces.
5. Conf
igure any of the following settings:
• Queue
ID. Use the menu to select the queue to be configured.
• Minimu
m Bandwidth. Enter a percentage of the maximum negotiated bandwidth for
the selected queue on the interface. Specify a percentage from 0–100, in increments
of 1.
• Sch
eduler Type. Selects the type of queue processing from the drop-down menu.
Options are Weighted and Strict. Defining on a per-queue basis allows the user to
create the desired service characteristics for different types of traffic.