Filter
Top Products
218
XS712T Smart Switch
MAC Binding Configuration
When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the MAC Binding Configuration screen to assign MAC ACL lists to
ACL Priorities and Interfaces.
To configure MAC ACL interface bindings:
1. Select Security
ACL > Basic MAC Binding Configuration.
2. Select an existing MAC ACL which requires binding configuration from the ACL ID menu.
The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are
applied
to traffic entering the port.
3. S
pecify an optional sequence number to indicate the order of this access list relative to other
access lists already assigned to this interface and direction.
A low number indicates high precedence order. If
a sequence number is already in use
for this interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not specified by the
user, a sequence number that is one greater than the highest sequence number currently
in use for this interface and direction will be used. The valid range is 1–4294967295.
4. Click th
e appropriate orange bar to expose the available ports or LAGs.
• T
o add the selected ACL to a port or LAG, click the box directly below the port or LAG
number so that a check mark displays in the box.
• T
o remove the selected ACL from a port or LAG, click the box directly below the port
or LAG number to clear the selection. An check mark in the box indicates that the
ACL is applied to the interface.
5. Click Apply.