Filter
Top Products
54
XS712T Smart Switch
access from only one station, use a Management Station IP Mask value of
255.255.255.255, and use that machine’s IP address for Client Address.
4. Next to Community String, specify a community name.
5. From the Access Mode list, select the access level for this community, which is either
Read/Write or Read Only.
6. From the Status list, enable or disable the community.
If you select Enable, the community name must be unique among all valid community
names or the set request will be rejected. If you select Disable, the community name will
become invalid.
7. Click Add.
To modify an existing community:
1. Select the check box next to the community.
2. Update the desired fields.
3. Click Apply.
To delete a community:
1. Select the check box next to the community to remove.
2. Click Delete.