Filter
Top Products
162
XS712T Smart Switch
Class Configuration
Use the Class Configuration screen to add a new DiffServ class name, or to rename or delete
an existing class. The screen also allows you to define the criteria to associate with a DiffServ
class. As packets are received, these DiffServ classes are used to prioritize packets. You can
have multiple match criteria in a class. The logic is a Boolean logical-and for this criteria. After
creating a Class, click the class link to the Class screen.
To create a DiffServ class:
1. Select QoS
DiffServ Advanced Class Configuration.
2. In the Class Name field, enter a class name.
3. Select the class
type
4. Click Add.
The switch supports only the Class Type value All, which means all the various match
criteria de
fined for the class should be satisfied for a packet match. All signifies the logical
AND of all the match criteria.
To rename an existing class:
1. Select the check box next
to the configured class.
2. Under Class
Name, update the name.
3. Click Apply
.
To delete a class:
1. Select the check box
next to the class name.
2. Click Delete.
To configure the class match criteria:
1. Click the
class name for an existing class.
The class name is a hyperlink. The following figure shows the configuration fields for the
class.