Filter
Top Products
121
XS712T Smart Switch
2. Select the Interface for which you want Multicast Router to be enabled or to be disabled.
3. Ent
er the VLAN ID for which the Multicast Router Mode is to be Enabled or Disabled.
4. Enable
the VLAN ID for the multicast router.
5. Click App
ly.
IGMP Snooping Querier
IGMP snooping requires that one central switch or router periodically query all end-devices
on the network to announce their multicast memberships. This central device is the IGMP
querier. The IGMP query responses, known as IGMP reports, keep the switch updated with
the current multicast group membership on a port-by-port basis. If the switch does not
receive updated membership information in a timely fashion, it will stop forwarding multicasts
to the port where the end device is located.
These screens enable you to configure a
nd display information on IGMP snooping queriers
on the network and, separately, on VLANs.
The IGMP Snooping Querier contains links describ
ed in the following sections.
• IGMP Snooping Querier Configuration
• IGMP Snooping Querier VLAN Configuration
• IGMP Snooping Querier VLAN Status
IGMP Snooping Querier Configuration
Use this screen to enable or disable the IGMP Snooping Querier feature, specify the IP
address of the router to perform the querying, and configure the related parameters.
To configure IGMP snooping querier settings:
1. Select Switch
ing Multicast IGMP Snooping Querier IGMP Snooping Querier
Configuration.