Filter
Top Products
176
XS712T Smart Switch
Use the buttons at the bottom of the screen to perform the following actions:
• Click Clea
r Counters to clear the authentication server and RADIUS statistics to their
default values.
• Click Refresh to refre
sh the screen with the most current data from the switch.
Accounting Server Configuration
Use the RADIUS Accounting Server Configuration screen to view and configure various
settings for one or more RADIUS accounting servers on the network.
To configure the RADIUS accounting server:
1. Select Se
curity Management Security RADIUS Accounting Server Configuration.
2. In the Accounting Server Address field, specify the IP address of the RADIUS accounting
server to add.
3. In
the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server authentication.
The valid range is 0–65535. Default is 1813.
4. From
the Secret Configured menu, select Yes to add a RADIUS secret in the next field.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS accou
nting server, this field indicates whether the shared secret for this server
has been configured.
5. In
the Secret field, type the shared secret to use with the specified accounting server.
6. From
the Accounting Mode menu, enable or disable the RADIUS accounting mode.
7. Click Apply.