Filter
Top Products
249
XS712T Smart Switch
Memory Log
The Memory Log stores messages in memory based upon the settings for message
component and severity. Use the Memory Log screen to set the administrative status and
behavior of logs in the system buffer. These log messages are cleared when the switch
reboots.
To configure the memory log settings:
1. Select Monitoring
Logs > Memory Log.
2. Select the radio buttons in the Admin Status field to determine whether to log messages.
• Enable. Enab
les system logging.
• Dis
able. Prevents the system from logging messages.
3. From the Be
havior menu, specify the behavior of the log when it is full.
• Wr
ap. When the buffer is full, the oldest log messages are deleted as the system logs
new messages.
• S
top on Full. When the buffer is full, the system stops logging new messages and
preserves all existing log messages.
4. If you
change the buffered log settings, click Apply to apply the changes to the system and
the changes will be saved.
The Memory Log table displays on the Memory Log screen.
The Total Number of messages displays the number
of messages the system has logged in
memory. Only the 64 most recent entries are displayed on the screen.
The rest of the screen displays the Memory Log messages. The format of the log message is
t
he same for messages that are displayed for the message log, persistent log, or console log.
Messages logged to a collector or relay via syslog have the same format as well.
The following example shows the standard format for a log message:
<14> Mar 24 05:34:05 10.131.12.183-1 UNKN[2176789276]:
m
ain_login.c(179) 3855 %% HTTP Session 19 initiated for user admin
connected from 10.27.64.122
The number contained in the angle brackets rep
resents the message priority, which is
derived from the following values: