Filter
Top Products
36
XS712T Smart Switch
• Time Zone Name. The acronym that represents the time zone. This field is not
validated against an official list of time zone acronyms.
• Hours Offset. The number of hours the system clock is offset from UTC, which is
also known as Greenwich Mean Time (GMT).
• Minutes Offset. The number of minutes the system clock is offset from UTC.
5. Click Apply.
6. Use the SNTP Server Configuration screen to configure the SNTP server settings, as
described in
SNTP Server Configuration on page 37.
The SNTP Global Status table on the Time Configuration screen displays information about
the system’s SNTP client. The following table describes the SNTP Global Status fields.
Table 6. Time Configuration status fields
Field Description
Version Specifies the SNTP Version the client supports.
Supported Mode Specifies the SNTP modes the client supports. Multiple modes can be
supported by a client.
Last Update Time Specifies the local date and time (UTC) the SNTP client last updated
the system clock.
Last Attempt Time Specifies the local date and time (UTC) of the last SNTP request or
receipt of an unsolicited message.
Last Attempt Status Specifies the status of the last SNTP request or unsolicited message for
both unicast and broadcast modes. If no message has been received
from a server, a status of Other is displayed. These values are
appropriate for all operational modes:
• Other. None of the following enumeration values.
• Success. The SNTP operation was successful and the system time
was updated.
• Request Timed Out. A directed SNTP request timed out without
receiving a response from the SNTP server.
• Bad Date Encoded. The time provided by the SNTP server is not
valid.
• Version Not Supported. The SNTP version supported by the
server is not compatible with the version supported by the client.
• Server Unsynchronized. The SNTP server is not synchronized
with its peers. This is indicated via the 'leap indicator' field on the
SNTP message.
• Server Kiss Of Death. The SNTP server indicated that no further
queries were to be sent to this server. This is indicated by a stratum
field equal to 0 in a message received from a server.
Server IP Address Specifies the IP address of the server for the last received valid packet.
If no message has been received from any server, an empty string is
shown.