Filter
Top Products
122
XS712T Smart Switch
2. From the Querier Admin Mode field, enable or disable the administrative mode for IGMP
Snooping Querier.
3. S
pecify the IP address to be used as source address in periodic IGMP queries om the
Snooping Querier Address field.
This address is used when no address is configured o
n the VLAN on which the query is
being sent.
4. S
pecify the IGMP protocol version used in periodic IGMP queries in the IGMP Version field.
5. S
pecify the time interval in seconds between periodic queries sent by the snooping querier in
the Query Interval field.
The Query Interval must be a value in the ran
ge of 1–1800 seconds. The default value is
60.
6. S
pecify the time interval in seconds after which the last querier information is removed in the
Querier Expiry Interval field.
The Querier Expiry Interval must be a value in the range of 60–300 seconds. The default
value is 12
5.
7. Click Apply.
IGMP Snooping Querier VLAN Configuration
Use this screen to configure IGMP queriers for use with VLANs on the network.
To create a new VLAN ID for IGMP snooping:
1. Select Sw
itching Multicast IGMP Snooping Querier Querier VLAN Configuration.