52
XS712T Smart Switch
This configuration is applied on all interfaces on the switch.
4. Click Apply.
To view per-interface LPI history information, select the int
erface with the information to view
from the Interface list. The screen refreshes and displays the LPI history for the selected
interface.
The following table describes the st
atus fields on the screen.
Table 13. LPI history information
Field Description
Percentage LPI time The percentage of time spent in LPI mode on the switch
Sample No. The current sample number. When the number increases to the
ma
ximum it rolls over and begins at 1.
Time Since The Sample Was
Re
corded
The amount of time that has passed since the last LPI history
sample was recorded. Each time the screen is refreshed it shows
a different time as it reflects the difference in current time and time
at which the sample was recorded.
Percentage Time spent in LPI
mode since
last sample
The percentage of time spent in LPI mode since the last sample
was recorded.
Percentage Time spent in LPI
mode since
last reset
The percentage of time spent in LPI mode since the switch was
reset.
5. Click Apply.