Filter
Top Products
87
XS712T Smart Switch
VLAN Status
This VLAN Status screen displays the status of all currently configured VLANs.
To view the current VLAN status:
1. Select Switch
ing VLAN Advanced VLAN Status.
2. View the following VLAN status information:
• VLAN ID. The
VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is (1 to
4093)
• VLAN Name.
The name of the VLAN. VLAN ID 1 is always named Default.
• VLAN T
ype. The VLAN type:
- Default (VL
AN ID = 1). always present.
- St
atic. a VLAN you have configured.
- Dynami
c. The VLAN that is created by GVRP registration initially has a type of
Dynamic (GVRP).
The type of AUTO VoIP Vlan is Dynamic (AUT
O VoIP). The VLAN that is created
by MVRP registration initially has a type of Dynamic (MVRP). The VLAN that is
created by L2 Tunnel has a type of Dynamic (L2 Tunnel). The VLAN that is
created by IP VLAN has a type of Dynamic (IP VLAN). The VLAN that is created
by DOT1x registration has a type of Dynamic (DOT1X). The VLAN that is created
by open flow registration has a type of Dynamic (OPENFLOW). The type of Auto
Video Vlan is Auto-Video.
• Routi
ng Interface. Displays the routing interface.
• Member
Ports. The ports that are included in the VLAN.
Port VLAN ID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
• All por
ts must have a defined PVID.
• I
f no other value is specified, the default VLAN PVID is used.
• I
f you want to change the port’s default PVID, you must first create a VLAN that includes
the port as a member.
• Use the
Port VLAN ID (PVID) Configuration screen to configure a virtual LAN on a port.