Filter
Top Products
276
XS712T Smart Switch
6. Download the firmware to primary or secondary storage.
• Download the firmware as to primary storage. By default, the firmware is
downloaded to primary storage and will be become the active image after the
download completes and the switch reboots.
• Download the firmware to secondary storage. Select the Secondary Storage
option to save the firmware as a backup image on the switch. To prevent the switch
from using the downloaded firmware as the active image, make sure the Run this FW
after download check box is clear.
Note: NETGEAR recommends that you download the same image as the
primary and secondary image for redundancy.
7. Download the firmware to the switch immediately, or schedule a different date and time to
download the firmware.
• Immediately. Select the Run Now check box.
• Later. Clear the Run Now check box and enter a date and time to complete the
download.
8. Enter the switch password in the Current Password field.
9. Click Apply.
WARNING:
It is important that you do not power off the administrative system
or the switch while the firmware upgrade is in progress.
If the download and upgrade is immediate, the upgrade process continues. When the
process is complete, the switch automatically reboots.
Note: Click the Tasks tab to view status information about the firmware
upgrade. The Task Management information shows information
about the file transfer process. After the firmware upgrade is
complete and the switch reboots, an entry in the Task table indicates
that the upgrade was successful. If the download is scheduled for a
later time or date, an entry shows the scheduled task.