Filter
Top Products
189
XS712T Smart Switch
IP 10.10.10.10 is configured with priority 1 to permit, and Source IP 10.10.10.10 is
configured with priority 2 to Deny, then access is permitted if the profile is active, and
the second rule is ignored.
4. Click App
ly.
Access Rule Configuration
Use the Access Rule Configuration screen to add security access rules.
To configure access rules:
1. Select Security > Ac
cess > Access Control Access Rule Configuration.
2. Specify the following settings:
• Rule
Type. Select the action to be performed when the rules selected are matched.
Use the drop-down box and select “Permit” or “Deny” access.
• Servi
ce Type. Select from the drop-down box. The policy is restricted by the
management chosen from the drop-down menu. Possible methods include HTTP,
Secure HTTP (SSL), and SNMP.
• Sou
rce IP Address. Enter Source IP Address of the client originating the
management traffic. Fill in the “Source IP address” in the text box.
• Mask.
Enter Source IP Address Mask of the client originating the management traffic.
Fill in the “Mask” details in the text box provided.
• Priority. Assign
a priority to the rule. The rules are validated against the incoming
management request in the ascending order of their priorities. If a rule matches,
action is performed and subsequent rules below are ignored. For example, if a
Source IP 10.10.10.10 is configured with priority 1 to permit, and Source IP
10.10.10.10 is configured with priority 2 to Deny, then access is permitted if the profile
is active, and the second rule is ignored.
3. Click App
ly.