Filter
Top Products
59
XS712T Smart Switch
LLDP Port Settings
Use the LLDP Port Settings screen to specify per-interface LLDP settings.
To configure LLDP port settings:
1. Select System
LLDP Advanced LLDP Port Settings.
The LLDP Port Settings screen displays.
2. Select the port(s) to configure.
• T
o configure a single port, select the check box associated with it, or type the port
number in the Go To Interface field and click Go.
• T
o configure multiple ports with the same settings, select the check box associated
with each port to configure.
• T
o configure all ports with the same settings, select the check box in the heading row.
3. Use the list
s to configure the LLDP settings for the selected ports:
• Adm
in Status: Select the status for transmitting and receiving LLDP packets:
• Tx Only:
Enable only transmitting LLDP PDUs on the selected ports.
• Rx On
ly: Enable only receiving LLDP PDUs on the selected ports.
• Tx an
d Rx: Enable both transmitting and receiving LLDP PDUs on the selected
ports.
• Dis
abled: Do not transmit or receive LLDP PDUs on the selected ports.
• Ma
nagement IP Address: Choose whether to advertise the management IP address
from the interface. The possible field values are:
• S
top Advertise: Do not advertise the management IP address from the interface.
• Auto Advertise:
Advertise the current IP address of the device as the
management IP address.