Filter
Top Products
37
XS712T Smart Switch
Click Refresh to refresh the screen with the most current data from the switch.
SNTP Server Configuration
Use the SNTP Server Configuration screen to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To configure a new SNTP server:
1. Select System
Management Time SNTP Server Configuration.
The SNTP Server Configuration screen displays.
2. From the Server Type list, select the type of SNTP address to enter in the Address field,
which is either an IP address (IPv4) or hostname (DNS).
3. Unde
r the Address field, specify the IP address or the hostname of the SNTP server.
4. If the UDP
port on the SNTP server to which SNTP requests are sent is not the standard
port (123), specify the port number.
Address Type Specifies the address type of the SNTP Server address for the last
received valid packet.
Server Stratum Specifies the claimed stratum of the se
rver for the last received valid
packet.
Reference Clock Id Specifies the reference clock identifier of the server for the last received
valid packet.
Server Mode Specifies the mode of the server for the last
received valid packet.
Unicast Sever Max Entries Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current
En
tries
Specifies the number of current valid unicast server entries configured
for this client.
Table 6. Time Configuration status fields (Continued)
Field Description