Filter
Top Products
188
XS712T Smart Switch
Access Control
Access control allows you to define a profile configuration and set access rules.
Access Profile Configuration
Use the Access Profile Configuration screen to set up a security access profile.
To configure an access profile:
1. Select Security > Access > Acces
s Control Access Profile Configuration.
2. Enter the name of the access profile to be added in the Access Profile Name field. Maximum
length is 32 characters.
3. Select one of the fo
llowing options:
• Activate
Profile. Activate an access profile.
• Deactiva
te Profile. Deactivate an access profile.
• Remove
Profile. Remove an access profile. The access profile should be
deactivated before removing the access profile.
The Packets Filtered field displays the number of packets filtered.
The Profile Summary section displays the following:
• Rule T
ype. This is the action to be performed when the rules selected are matched.
• Service T
ype. The policy is restricted by the management chosen from Drop-down
menu. Possible methods include “HTTP”, “Secure HTTP (SSL)”, and “SNMP”.
• Source IP Address. This is the Sou
rce IP Address of the client originating the
management traffic. Fill in the “Source IP address” in the text box provided.
• Mas
k. This is the Source IP Address Mask of the client originating the management
traffic.
• Priority. Assign a p
riority to the rule. The rules are validated against the incoming
management request in the ascending order of their priorities. If a rule matches,
action is performed and subsequent rules below are ignored. For example, if a Source