Filter
Top Products
191
XS712T Smart Switch
Note: If 802.1X is enabled, authentication is performed by a RADIUS
server. This means the primary authentication method must be
RADIUS. To set the method, select Security
Management
Security
Authentication List and select RADIUS as method 1 for
defaultList. For more information, see
Authentication List
Configuration on page 180.
• Disable. The switch does not check for 802.1X authentication before allowing traffic
on any ports, even if the ports are configured to allow only authenticated users.
3. Select the radio button in the VLAN Assignment Mode field.
Select Enable and Disable. The default value is Disable.
4. Select the radio button in the Dynamic VLAN Creation Mode field.
This lists two options for Dynamic VLAN Creation Mode: Enable and Disable. The
default value is Disable.
5. Select the radio button in the EAPOL Flood Mode.
This lists two options for EAPOL Flood Mode: Enable and Disable. The default value is
Disable.
6. Click Apply.
Port Authentication
Use the Port Authentication screen to enable and configure port access control on one or
more ports.
To configure 802.1X settings for the port:
1. Select Security Port Authentication > Advanced Port Authentication.
Note: Use the horizontal scroll bar at the bottom of the browser to view all
the fields on the Port Authentication screen. The figures on the
following screen are both images of the Port Authentication screen.