Filter
Top Products
16
XS712T Smart Switch
To access the management interface form the Smart Control Center:
1. Open a web browser.
2. Enter th
e IP address of the switch in the address field of the browser.
Understand the User Interfaces
The XS712T Smart Switch software includes a set of comprehensive management functions
for configuring and monitoring the system by using one of the following methods:
• W
eb user interface
• Simple Network Ma
nagement Protocol (SNMP)
Each of the standards-based management methods allows you to configure a
nd monitor the
components of the XS712T Smart Switch software. The method you use to manage the
system depends on your network size and requirements, and on your preference.
This manual describes how to use the web-based interface to manage and monitor the
sy
stem.
Use the Web Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
• HTML version 4
.0, or later
• HTTP version
1.1, or later
• Java Runtime
Environment 1.6 or later
To log on to the Web interface:
1. Op
en a web browser and enter the IP address of the switch in the web browser address
field.
The login screen displays.
2. T
ype the password in the Password field.
The factory default password is password. Passwords are case-sensitive.
3. Click Lo
gin.
After the system authenticates you, the System Information screen displays.
The following figure shows the layout of the
Smart Switch web interface.