Filter
Top Products
56
XS712T Smart Switch
Trap Flags
Use the Trap Flags screen to enable or disable traps the switch can send to an SNMP
manager. When the condition identified by an active trap is encountered by the switch, a trap
message is sent to any enabled SNMP Trap Receivers, and a message is written to the trap
log.
To configure the trap flags:
1. Select System
SNMP SNMP V1/V2 Trap Flags.
The Trap Flag screen displays.
2. Enable or disable the following system traps:
• Authentica
tion. When enabled, SNMP traps are sent when events involving
authentication occur, such as when a user attempts to access the device
management interface and fails to provide a valid user name and password.
• Link Up/Down. Wh
en enabled, SNMP traps are sent when the administrative or
operational state of a physical or logical link changes.
• S
panning Tree. When enabled, SNMP traps are sent when various spanning tree
events occur.
• AC
L. When enabled, SNMP traps are sent when a packet matches a configured ACL
rule that includes ACL logging.
3. Click Apply.
SNMP Supported MIBS
This screen displays a list of all MIBs supported by the switch.