Filter
Top Products
144
XS712T Smart Switch
VLAN Routing Configuration
Use the VLAN Routing Configuration screen to view information about the VLAN routing
interfaces configured on the system or to assign an IP address and subnet mask to VLANs
on the system.
To configure VALN routing:
1. Select Routing
VLAN > VLAN Routing.
2. In the VLAN list, select the VLAN you want to configure for VLAN routing.
This field will display the all IDs of VLANs config
ured on this switch.
3. Enter an IP address of the
VLAN routing interface.
4. Enter a subnet
mask for the VLAN routing interface.
5. Under IP MT
U, specify the maximum size of IP packets sent on an interface.
A valid range is from 68 bytes to the link MTU. The default value is 1500. A value of 0
ind
icates that the IP MTU is unconfigured. When the IP MTU is unconfigured, the router
uses the link MTU as the IP MTU. The link MTU is the maximum frame size minus the
length of the layer 2 header.
6. Click Add.
7. V
iew the following information about the routing VLAN.
Field Description
Port The port number assigned to the VLAN Routing Interface.
MAC Address The MAC Address assigned to the VLAN Routing Interface.