Filter
Top Products
169
XS712T Smart Switch
- Mark IP Precedence. These packets are marked by DiffServ with the specified IP
Precedence value before being presented to the system forwarding element. This
selection requires that the Mark IP Precedence value field be set.
- Ma
rk IP DSCP. These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set.
5. Click App
ly.
Service Configuration
Use the Service Configuration screen to activate a policy on an interface.
To attach a DiffServ policy to an interface:
1. Select Qo
S DiffServ Advanced Service Configuration.
2. To configure DiffServ policy settings for a physical port, enter the interface and click Go to
select that particular interface.
3. Select th
e interfaces for which you want to configure the service interface settings:
• T
o configure service interface settings for a Link Aggregation Group (LAG), click LAGS.
• T
o configure service interface settings for both physical ports and LAGs, click ALL.
4. Select th
e check box next to the port or LAG to configure.