Filter
Top Products
55
XS712T Smart Switch
Trap Configuration
Use this screen to configure settings for each SNMPv1 or SNMPv2 management host that
will receive notifications about traps generated by the device. The SNMP management host
is also known as the SNMP trap receiver.
To add an SNMP trap receiver:
1. Select System
SNMP SNMP V1/V2 Trap Configuration
The Trap Configuration screen displays.
2. Next to Recipients IP, specify the IP address in x.x.x.x format to receive SNMP traps from
this device.
3. From the V
ersion list, select the trap version to be used by the receiver from the menu.
• SNMP
v1. The switch uses SNMP v1 to send traps to the receiver.
• SNMP
v2: The switch uses SNMP v2 to send traps to the receiver.
4. N
ext to Community String, specify the name of the SNMP community that includes the
SNMP management host and the SNMP agent on the device.
5. From
the Status list, select Enable to send traps to the receiver.
6. Click Add.
To modify information about an existing SNMP recipient:
1. Select
the check box next to the recipient.
2. Upda
te the desired fields.
3. Click App
ly.
To delete an SNMP trap recipient:
1. Select
the check box next to the recipient to remove.
2. Click Dele
te.