Filter
Top Products
99
XS712T Smart Switch
STP Configuration
The STP Configuration screen contains fields for enabling STP on the switch.
To configure STP settings on the switch:
1. Select Switch
ing STP Basic STP Configuration.
2. From the Spanning Tree State field, specify whether to enable or disable Spanning Tree
operation on the switch.
3. From the ST
P Operation Mode field, specify the Force Protocol Version parameter for the
switch.
Options are:
• STP (S
panning Tree Protocol). IEEE 802.1D
• RSTP (Rapid S
panning Tree Protocol). IEEE 802.1w
• MSTP (Multiple S
panning Tree Protocol). IEEE 802.1s
4. S
pecify the configuration name and revision level.
• Confi
guration Name. Name used to identify the configuration currently being used. It
can be up to 32 alphanumeric characters.
• Confi
guration Revision Level. Number used to identify the configuration currently
being used. The values allowed are between 0 and 65535. The default value is 0.
5. In the Forward
BPDU while STP Disabled field, specify whether spanning tree BPDUs
should be forwarded (Enabled) or not (Disabled) while spanning-tree is disabled on the
switch.