Filter
Top Products
193
XS712T Smart Switch
- Auto. The system automatically detects the mode of the interface.
- Authorized. The system places the interface into an authorized state without
being authenticated. The interface sends and receives normal traffic without client
port-based authentication.
- Unauthorized. The system denies the selected interface system access by
moving the interface into unauthorized state. The switch cannot provide
authentication services to the client through the interface.
- MAC based. The authenticator PAE sets the controlled port mode to reflect the
outcome of authentication exchanges between a supplicant, an authenticator, and
an authentication server on a per supplicant basis.
• Guest VLAN ID. This field allows the user to configure the Guest VLAN ID on the
interface. The valid range is 0–4093.The default value is 0. Enter 0 to reset the Guest
VLAN ID on the interface.
• Guest VLAN Period. This input field allows the user to enter the Guest VLAN period
for the selected port. The Guest VLAN period is the value, in seconds, of the timer
used by the Guest VLAN Authentication. The Guest VLAN timeout must be a value in
the range of 1–300. The default value is 90.
• Unathenticated VLAN ID. This input field allows the user to enter the
Unauthenticated VLAN Id for the selected port. The valid range is 0–3965. The
default value is 0. Changing the value will not change the configuration until the
Apply button is pressed. Enter 0 to clear the Unauthenticated VLAN Id on the
interface.
• Periodic Reauthentication. Use this field to enable or disable reauthentication of the
supplicant for the specified port. Select Enable or Disable. If the value is Enable,
reauthentication will occur. Otherwise, reauthentication will not be allowed. The
default value is Disable. Changing the selection will not change the configuration until
the Apply button is pressed.
• Reauthentication Period. Indicates the time span in which the selected port is
reauthenticated. The field value is in seconds. The range is 1–65535, and the field
default is 3600 seconds.
• Quiet Period. This input field allows the user to configure the quiet period for the
selected port. This command sets the value, in seconds, of the timer used by the
authenticator state machine on this port to define periods of time in which it will not
attempt to acquire a supplicant. The quiet period is the period for which the
authenticator does not attempt to acquire a supplicant after a failed authentication
exchange with the supplicant. The quiet period must be a number in the range of 0
and 65535. A quiet period value of 0 means that the authenticator state machine will
never acquire a supplicant. The default value is 60. Changing the value will not
change the configuration until the Submit button is pressed.
• Resending EAP. This input field allows you to configure the transmit period for the
selected port. The transmit period is the value, in seconds, of the timer used by the
authenticator state machine on the specified port to determine when to send an
EAPOL EAP Request/Identify frame to the supplicant. The transmit period must be a
number in the range of 1–65535. The default value is 30.