Filter
Top Products
86
XS712T Smart Switch
VLAN Membership Configuration
Use this screen to configure VLAN Port Membership for a particular VLAN. You can select
the Group operation through this screen.
To configure VLAN membership for specific ports and LAGs:
1. Select Sw
itching VLAN Advanced VLAN Membership.
2. From the VLAN ID field, select the VLAN to which you want to add ports.
3. Click th
e orange bar below the VLAN Type field to display the physical ports on the switch.
4. Click
the lower orange bar to display the LAGs on the switch.
5. T
o select the port(s) or LAG(s) to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank
squ
are means that the port is not a member of the VLAN.
• T
agged. Frames transmitted from this port are tagged with the port VLAN ID.
• Unt
agged. Frames transmitted from this port are untagged. Each port can be an
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
6. Click Apply.
To configure the same VLAN membership settings for all ports and LAGs:
1. Select Sw
itching VLAN Advanced VLAN Membership.
2. In
the VLAN ID list, select the VLAN to which you want to add ports.
3. In
the Group Operations list, select one of the following options:
• Unt
ag All. All frames transmitted from this VLAN will be untagged. All the ports will be
included in the VLAN.
• Ta
g All. All frames transmitted for this VLAN will be tagged. All the ports will be
included in the VLAN.
• Remove
All. Excluding all ports from the selected VLAN.
4. Click Apply.