Filter
Top Products
11
XS712T Smart Switch
6. Select the switch, then click Configure Device.
The screen expands to display additional fields at the bottom.
7. Select the Disabled radio button to disable DHCP.
8. Ente
r the static switch IP address, gateway IP address, and subnet mask for the switch, and
then type your password.
Tip: Y
ou must enter the current password every time you use the Smart
Control Center to update the switch setting. The default password is
password.
9. Click App
ly to configure the switch with the network settings.
Ensure that your computer and the switch are in the same subnet. Make a note of these
settings
for later use.