Filter
Top Products
237
XS712T Smart Switch
To reset the counters for all interfaces on the switch:
1. Select the check box in the heading of the table.
2. Click Clear.
To reset the counters for a specific interface:
1. Select the check box next to the interface for which you want to clear the counters.
You can also type the interface number (for example, 1/g7) in the Go To Interface field at
the top or bottom of the table and click Go.
2. Click Clear.
Broadcast Packets Received The total number of good packets received that were directed to the
broadcast address. This does not include multicast packets.
Packets Transmitted Without
Errors
The number of frames that have been transmitted by this port to its segment.
Transmit Packet Errors The number of outbound packets that could not be transmitted because of
errors.
Collision Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics
for this port were last cleared.
Table 38. Port statistics (Continued)
Field Description