Filter
Top Products
14
XS712T Smart Switch
5. Select Use the following IP address and set the IP address of the administrative system to
an address in the 192.168.0.0 network, such as 192.168.0.200.
The IP address must be different from that of the switch but within the same subnet.
WARNING:
When you change the IP address of your administrative system,
you lose your connection to the rest of the network. Be sure to
write down your current network address settings before you
change them.
6. Click OK.
To configure a static address on the switch:
1. Use a straig
ht-through cable to connect the Ethernet port on the administrative system
directly to any port on the XS712T.
2. Open a we
b browser on your computer and connect to the management interface.
For more information, see Access the Management Interface from a Web Browser on
page 15.
3. Change th
e network settings on the switch to match those of your network.
For more information, see IP Configuration on p
age 29.
After you change the network settings on the switch, return the network configuration on your
administrative system to the
original settings.