Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3 3-1
3
Configuring System
Information
Overview
You can manage system information by using either the Web Agent
or the CLI. The following procedures to manage your system
information are provided in this chapter:
■ Entering General System Information
■ Enabling the Simple Network Time Protocol
■ Setting Summer Time Hours
■ Setting the System Clock
■ Setting the Temperature System
■ Displaying the Power System Statistics
■ Displaying Cooling System Statistics
■ Performing a Reset
* Note: The last step in each procedure tells you to click Apply to
save any changes. This saves the changes to the Running
config only. The Startup config has not changed.
Therefore, these and other changes will be lost if your
switch goes down or if you power off.
To save these changes to the Startup Config, you must
copy the Running config to the Startup config. Refer to
the "Copying Files," in Chapter 2, “Initialize and Setup”.
Entering General System Information
You can enter general information about your system by using
either the Web Agent or the CLI.
Web Agent
Procedure
You can enter general system information using the following Web
Agent fields:
■ Switch name