Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 12-15
Configuring IPX Routing
3. Refer to Table 6-68 to configure the Add IPX Static Service
dialog box parameters.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
5. To view or modify IPX Static Services, select Static Services
from Routing > IPX > Configuration group on the Web
Agent window. The configured IPX Static Services dialog box
opens (Figure 6-102)
Table 6-68. IPX Static Service Dialog Box Parameters
Parameter Allows you to ...
Service Name Enter the IPX Static Service name. For example, FS_ENG01. Use
SLIST (NetWare 3.x) or NLIST (NetWare 4.x) to list your current
server names and types from your NetWare server. You may
want to explicitly add a service so that clients always use the
services of a particular server.
Type Enter the service type (in hex) that identifies the type of IPX
static service the server provides.
Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Network Enter the IPX Static Service network number (in Hex).
Node Enter the IPX Static Service node address (in hex).
The format of the node value is aa:bb:cc:dd:ee:ff.
Socket Enter the number (in hex) associated with a running process on
the end node (for example, RIP, NLSP).
Next-Hop Node Enter the MAC address of the next destination through which
the service is reached.
The format of the node value is aa:bb:cc:dd:ee:ff.
Interface Enter the interface that corresponds to the next-hop node.
Hops Enter the number of routers (hops) that the packet must pass
through before reaching the network number associated with
the service.