Filter
Top Products
-18
Chapter
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Displaying the Priority of a MAC Address
Command Use the show aft entry command to display the priority of a source
MAC address or destination MAC address. The syntax of the
command is:
Avaya>show aft entry [mac <wildcard-mac-address>] [VLAN
{<VLAN-id> | name <VLAN-name>}] [port-binding {cpu | filter |
forward [<mod-port-spec>]}] [status {learned | management | self
| multicast}]
For more information about this command, see Chapter 2, “AFT,” in
the Command Reference Guide for the Avaya P550R, P580, P880, and P882
Multiservice Switches, Version 5.3.1.
• Associate MAC address
00:00:00:00:00:55 with port 1 on
the module in slot 3 and with
VLAN 50.
• Forward frames that have a
source or destination MAC
address of 00:00:00:00:00:55.
• Assign a priority of 7 to packets
that have a destination MAC
address of 00:00:00:00:00:55.
set aft entry 00:00:00:00:00:55
VLAN 50 port-binding forward
3/1 da-priority aft 7
• Associate MAC address
00:00:00:00:00:55 with port 1 on
the module in slot 3 and with
VLAN 50.
• Forward frames that have a
source or destination MAC
address of 00:00:00:00:00:55.
• Associate a priority of 5 with the
destination MAC of address
0:00:00:00:00:55.
• Assign the higher of the port
priority, tag priority, or
destination MAC address priority
(5) to frames that have a
destination MAC address of
00:00:00:00:00:55.
set aft entry 00:00:00:00:00:55
VLAN 50 port-binding forward
3/1 da-priority max-port-aft 5
Table 6-145. Examples: set aft entry
To . . . Enter . . .
2 of 2