Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-5
Managing Intelligent Multicasting
LGMP and CGMP are similar protocols. Both protocols have a server
implementation that runs on a switch that implements the Learning
Process, and both protocols have a client implementation which
runs on switches that do not have local IP interfaces on all involved
VLANs. For the Avaya Multiservice switch, only the client
implementation of CGMP is available in case the switch is connected
to a Cisco router. This implementation is called CGMP Snooping.
* Note: IGMP Snooping must be enabled to learn the sessions
that the LGMP server will disseminate. An LGMP server
is active only for VLANs that have an IGMP interface
enabled.
Configuring Intelligent Multicasting
This section provides the following procedures:
■ Configuring Global Intelligent Multicasting
■ Displaying Router Ports
■ Configuring Static Router Ports
■ Searching for Intelligent Multicast Sessions
■ Deleting an Intelligent Multicast Session
■ Deleting a Multicast Session Client Port
■ Creating a Static Multicast Session
■ Deleting Static Multicast Sessions
■ Creating Static Client Ports
■ Deleting Static Client Ports
Configuring Global Intelligent Multicasting
You can configure intelligent multicasting globally using either the
Web Agent or the CLI.
Using the Web
Agent
To configure intelligent multicasting globally using the Web Agent:
1. Select Global Configuration from the Layer 2 Switching >
Intelligent Multicast group on the Web Agent window. The
Intelligent Multicast Global Configuration dialog box opens
(Figure 16-2).