Filter
Top Products
-22
Chapter
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Displaying the DiffServ Table
Command Use the show diffserv table command to display the priority that
is assigned to each DSCP.
The syntax of the command is:
Avaya>show diffserv table
* Note: The show diffserv table CLI command displays the
packet loss probability (PLP) for each DSCP. However,
the switch does not currently support PLP.
Displaying the QoS Settings for a Physical Port
Command Use the show port command to display the QoS settings for a
physical port. This command displays the priority of the port, if the
port is set to ignore 802.1p tag priority, and if the port is set to use
the DSCP for bridged IP traffic.
The syntax of the command is:
Avaya>show port [{<mod-num> | <mod-swport-range>} [...,{<mod-
num> | <mod-swport-range>}]]
Table 6-149. Keywords, Arguments, and Options
Keyword, Argument
or Option
Definition
<mod-num> The slot number of a module. If you
specify <mod-num>, the switch displays
the QoS settings for all ports on the
module in the slot that you specify.
1 of 2