Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 5-37
Configuring Port Parameters
6. Select Restore to keep the previous settings or Apply to
accept the new settings.
Viewing Switch Port Parameters
You can view switch port parameters through either the Web Agent
and the CLI.
Web Agent
Procedure
To view switch port parameters using the Web Agent:
1. Select Configuration from the Modules & Ports group of
the Web Agent window. The Module Information
dialog box opens (Figure 5-1).
2. Select the switch ports for that module from the Switch
Ports column. The Switch Ports dialog box opens (Figure 5-
7).
3. Refer to Table 6-1 for more information about the Switch
Port dialog box parameters:
Table 6-1. Switch Port Parameters
Parameter Definition
Links Opens associated windows.
Port Displays the port associated with the selected
module.
Name Displays the port name and opens the Switch
Port Configuration window for the selected
module.
Port VLAN Displays the port VLAN for the selected
module.
VLAN Classification Displays the port VLAN classification for the
selected module.
Trunk Mode Displays the port’s trunk mode for the
selected module.
Hunt Group Displays the hunt group of which the port is a
member for the selected module.
STAP Mode Displays whether the spanning tree algorithm
protocol is enabled or disabled for the selected
module.
MAC Address Displays the port’s MAC address for the
selected module.