Filter
Top Products
11-32 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter
8. Refer to Table 6-63 for an explanation of the LSA Detail
dialog box parameters.
9. To update the LSA entry, select Refresh Entry.
Searching the
OSPF Link State
Database Using
the CLI
To search the OSPF link state database using the CLI, enter the
following command from Priv mode:
># show ip ospf database <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
Table 6-63. LSA Detail Dialog Box Parameters
Parameter Definition
Area Displays the 32-bit identifier of the area from which
the LSA was received.
Type Displays the link state type. Types include:
• Router Links
• Network Links
• Summary Network
• Summary AS Border
• AS External
• Multicast Group
• NSSA External
LS ID Displays the link-state ID. The link-state ID is an LS
type specific field containing either a router ID or an
IP address that identifies the piece of the routing
domain that is being described by the advertisement.
Router ID Displays the router ID of the originator of the link
state advertisement.
Sequence Displays the link-state sequence number. The
sequence number is a 32-bit signed integer.
Checksum Displays the checksum of the complete contents of
the advertisement, except the age field.
Age Displays the time (in seconds) of the LSA.
Network Mask Displays the network mask for the LSA.
Attached
Router ID 1 &2
Displays the router ID for the attached router(s).