Filter
Top Products
9-118 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI To configure the PPP console after you have made all the applicable
cable connections with an IP address using the CLI, enter the
following command in Interface mode:
(config if <interface-name>)# ip VLAN {<VLAN-
id>|name <VLAN-name>| Ethernet-Console|Serial-
Console}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.