Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 11-15
Configuring the OSPF Routing Protocol
Figure 6-83. Add OSPF Virtual Link Dialog Box
3. Enter the new OSPF Link information. Refer to Table 6-56 for
an explanation of the Add OSPF Virtual Link dialog box
parameters:
Table 6-56. Add OSPF Virtual Link Dialog Box Parameters
Parameter Defines the...
Router ID Router ID for the far end of the virtual link.
Area Area ID through which the virtual link travels.
Transmit Delay Estimated number of seconds it takes to transmit a
link state update packet over this virtual link. The
value range is 1-3600. The default is 1.
Retransmit
Interval
Number of seconds between link-state
advertisement retransmissions for adjacencies
belonging to this virtual link. This value is also used
when retransmitting database description and link-
state request packets. The value range is 1-3600.
The default is 5.
Hello Interval Time in seconds between the Hello packets that the
router sends on the virtual link. This value must be
the same for all routers attached to a common
network. The value range is 1-65535. The default is
10.