Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 9-75
Configuring IP Routing
Figure 6-51. IGMP Interface Statistics Dialog Box
2. To modify the interface statistics, perform one of the
following:
— Select one or more interfaces, and then click CLEAR to
reset statistics on those interfaces to zero.
— Click CLEAR ALL to reset all statistics to zero.
— Click REFRESH to view the latest interface statistics.
3. Refer to Table 6-29 fro an explanation of the IGMP
Interface Statistics dialog box parameters:
Table 6-29. IGMP Interface Statistics Dialog Box Parameters
Parameter Defines the...
IGMP Interface IP interface for these statistics.
IP Address IP address associated with the interface.
IP Address Mask Subnet mask associated with each listed interface.
State Current state of the interface. For example, if the interface
is enabled and operating properly, UP is displayed.
IGMP Version Version of IGMP enabled on each interface.The default
version is V2
This Router is Group
Membership Querier
Router that was configured or elected to be the designated
group membership querier. The switch queries hosts
on each interface only when it is acting as the designated
querier on that interface.
Robustness Variable Setting for the expected packet loss on a subnet. If a
subnet is expected to have more packet loss, the
Robustness Variable should be increased. The Robustness
Variable must not be set to 0 and should not be set to 1.
The default value is 2
Next Query Request (sec) Remaining amount of time (in seconds) before the next
group membership query is transmitted.