Filter
Top Products
4-48 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Chapter 4
Figure 4-28. VTP Snooping Configuration Window
8. Refer to Table 4-8 and configure the VTP Snooping
parameters.
Table 4-8. VTP Snooping Parameters
Parameter Definition
VTP Snooping State Select Enable to enable VTP snooping globally
for the switch. The default value is Disable.
Note: Enabling or disabling VTP Snooping
does not clear any learned VTP
information.
Domain Name Enter the name associated with the Cisco VTP
Domain. The default is Null (not set).
Changing this parameter automatically clears
the learned VTP information (the remaining
parameters in this table).
Note: The domain name is automatically
learned from a Cisco VTP switch
provided both the Domain Name is
Null and the VTP Snooping State is
enabled on the switch.
Configuration
Revision Number
Displays the VTP snooping configuration
revision number associated with the last
successful VTP configuration update on the
switch.
Note: VLANs are only be learned by VTP
Snooping when a received VTP
message has a Configuration Revision
Number greater than this learned
value.