Filter
Top Products
15-22 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Editing an AppleTalk Zone Filter
You can edit an AppleTalk zone filter using either the Web Agent or
the CLI.
Using the Web
Agent
To edit an AppleTalk zone filter using the Web Agent:
1. Select Zone Filter from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Zone Filter dialog box opens (Figure 6-135).
2. Click the checkbox in the Select column next to the
AppleTalk zone filter that you want to be edit.
3. Refer to Table 6-86 to edit the AppleTalk Zone Filter dialog
box parameters:.
4. Click:
— CREATE to add a new zone filter. The Add AppleTalk
Zone Filter dialog box opens. See "Creating an
AppleTalk Zone Filter", earlier in this section for more
information.
— DELETE to remove the selected zone filter.
— CANCEL to restore previous settings.
— Edit If to add or delete this zone filter to/from an
interface. The Add/Delete Interface to Zone Filter
dialog box opens. See "Adding or Deleting Interfaces to a
Zone Filter", later in this section for more information.
Using the CLI To edit an AppleTalk zone filter using the CLI, enter the following
command from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> zone
<string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.