Filter
Top Products
9-86 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
3. Refer to Table 6-36for an explanation of the DVMRP Route
Table parameters:
Displaying the
DVMRP Routing
Table, using the
CLI
To display the DVMRP route table using the CLI, enter the following
command from configuration mode:
(configure)# show ip dvmrp routes
Table 6-36. DVMRP Route Table Parameters
Parameter Defines the...
Source Network Network from which a multicast flow may originate.
Source Network Mask Source network mask.
Reporting Router IP address of the router reporting this route to its
neighbors.
Reporting Router Interface IP interface configured, which leads to the upstream
neighbor (DVMRP router).
Route Metric Router’s cost to source network.
Expiration Period in (sec) Time (in seconds) remaining before the source network is
removed from the DVMRP routing table.
Upstream Router(s) IP address of the DVMRP router that is the upstream
neighbor to the local router. The local DVMRP router
must know which DVMRP router is its upstream
neighbor to determine how packets from a given source
will be transmitted to a given multicast group. Opens
DVMRP Upstream Router(s) dialog box.
Designated Forwarder(s) Network router(s) responsible for forwarding from the
source network onto the downstream interface. Opens
the Designated Forwarders dialog box.
Downstream Dependent
Router(s)
Number of downstream DVMRP routers that are
dependent on this router for this particular route. Opens
the DVMRP Downstream Dependent Router(s) dialog
box.