Filter
Top Products
105
3- 9.2 Dynamic MAC Table
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192
entries, and is sorted first by VLAN ID, then by MAC address.
Web Interface
To Display the MAC Address Table in the Web interface:
1. Click Dynamic MAC Table.
2. Specify the VLAN and MAC Address.
3. Display the MAC Address Table.
Figure 3- 9.2: The Dynamic MAC Address Table information
1.
2.
Parameter description:
MAC Table Columns
Switch (stack only). The stack unit where the entry is learned.
Type :
Indicates whether the entry is a static or a dynamic entry.
VLAN :
The VLAN ID of the entry.
MAC address :
The MAC address of the entry.
Port Members :
The ports that are members of the entry.
Auto-refresh :
Check the Auto-fresh box and the device will refresh the information automatically.
Upper right icon (Refresh, Clear, <<, >>):
Click on the Refresh icon to refresh the MAC address entries manually.or press clear to
clean up the MAC table. Press << or >> to go up or down pages of the table.