Filter
Top Products
LGB5128A User Manual
65
3-5.2 Port Configuration
The chapter describes how to configure the MRSTP port. After you configure the MRSTP
instance, then you can assign the port to join the instance and set the parameters to
implement MRSTP.
Web Interface
To configure the MRSTP Port configuration in the Web interface:
1. Click Configuration, MRSTP, Port Configuration.
2. Scroll to select the instance you want to assign to the Port.
3. Scroll to select includes Path Cost, Priority, Admin Edge, and Admin P2P parameters.
4. Click the save button to save the setting
6. If you want to cancel the setting, then you need to click the Reset button.
It will revert to previously saved values
Figure 3-5.2: The MRSTP Port Configuration.