Filter
Top Products
163
Link Monitoring Support :
If status is enabled, DTE supports interpreting Link Events. The field will show enabled.
MIB Retrieval Support :
If status is enabled, DTE supports sending Variable Response OAMPDUs.. The field will
show enabled.
MTU Size :
This represents the largest OAMPDU, in octets, supported by the DTE. This value is
compared to the remotes Maximum PDU Size and the smaller of the two is used.
Multiplexer State :
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sub-layer.
In discarding state, the device discards all the non-OAMPDU's.
Parser State :
When in forwarding state, the device forwards non-OAMPDUs to a higher sub-layer. When
in loopback, the device is loops back non-OAMPDUs to the lower sub-layer. When in
discarding state, the device discards non-OAMPDUs.
Organizational Unique Identification :
24-bit identifier unique to the vendor.
PDU Revision :
Thie indicates the current revision of the Information TLV. The value of this field will start at
zero and be incremented each time something in the Information TLV changes. When the
switch receives an Information TLV from a peer, an OAM client may use this field to decide
if it needs to be processed (an Information TLV that is identical to the previous Information
TLV doesn't need to be parsed because nothing in it has changed).
. Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh):
Click on these icons to refresh information manually.