Filter
Top Products
LGB5128A User Manual
156
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
3-20 Trap Event Severity
Use this function to set a Alarm trap and get the Event log. The Trap Events Configuration
function enables the switch to send out the trap information when pre-defined trap events
occur.
Web Interface
To configure the Trap Event Severity Configuration in the Web interface:
1. Click Configuration, Trap Event Severity Configuration.
2. Scroll to select the Group name and Severity Level.
3. Click the save button to save the setting.
4. To cancel the setting, click the Reset button. It will revert to previously saved values
Figure 3-21.1: The Trap Event Severity Configuration
Parameter description:
Group Name :
The field describes the Trap Event definition.
Severity Level :
Scroll to select the event type: “Emerg, Alert, Crit, Error, Warming, Notice, Info and
Debug”, .
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.