Filter
Top Products
LGB5128A User Manual
224
5-2 Firmware
This section describes how to upgrade Firmware. The Switch can be enhanced with more
value-added functions by installing firmware upgrades.
5-2.1 Firmware Upgrade
This page facilitates an update of the firmware controlling the
Web Interface
To configure a Firmware Upgrade Configuration in the Web interface:
1. Chick Browser to select firmware in you device.
2. Click Upload.
Figure 5-2.1: The Firmware update
Parameter description:
Browse :
Click the “Browse...” button to search the Firmware URL and filename.
Upload:
Click the “Upload” button and the switch will start to upload the firmware from a stored PC
or Server location.
NOTE: This page facilitates an update of the firmware
controlling the switch stack. Uploading software will update
all managed switches in the stack to the location of a
software image and click. After the software image is
uploaded, a page announces that the firmware update is
initiated. After about a minute, the firmware is updated and
all managed switches in the stack restart. the switch
restarts.
WARNING:
While the firmware is being updated, Web access
appears to be defunct. The front LED flashes Green/Off with
a frequency of 10 Hz while the firmware update is in
progress. Do not restart or power off the device at this time
or the switch may fail to function afterwards.